B6250 PS DRIVER DETAILS:
|File Size:||11.0 MB|
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* (*Free Registration Required)|
B6250 PS DRIVER
Enables 2 sided printing.
PS Printer Driver
B6250 PS paper is jammed inside the duplex unit, it is described as cover C. When the rear tray has been installed, the paper output location can be switched between it and the centre output tray. Raise the lever to output to the rear tray and lower the lever to output to the centre output tray. Remove this when installing optional accessories such as hard disk and additional memory. B6250 PS the toner on the paper. Do not touch this when using the printer as it is hot.
OKI B(PCL6) Printer Drivers - Download Device Drivers - -
Press to print the menu map. The menu map 2 pages will print with all the current printer settings. Press to enter the B6250 PS status. When in the off-line status, the machine cannot receive data or process printing.
Press again to exit the off-line status and enter the on-line status where the machine can receive data from the computer. Print screen for displaying printer status and Menu screen for setting configuration. NOTE B6250 PS message displayed differs according to the options installed and setting status. The following contents are shown on the screen.
Current printer statusShown at top left, e. Online ready to printprinting, etc.
Port receiving B6250 PS at bottom left. Which printer port is currently receiving print data, e. USB, Net, etc. EmulationShown at bottom right. Which page description language emulation is currently in use, e.
PCL, PS, etc. The first of a list of menus appears at top right. Refer to: Settings on the Control Panel on page When the power is switched on, various screens will be displayed on the control panel. Check that this display changes to B6250 PS. Printing is unavailable during this period. When the printer is ready for printing, Online will be displayed. It may lead to a paper jam.
By checking the display on the control panel, confirm that the printer is not processing any data. The default idle time from last print activity until the printer enters Power Save mode is 5 minutes. This time can be adjusted by the operator to any of the following: When no print data is received within 5 minutes default since the last page is printed, the printer B6250 PS enter Power Save mode. An informative message is displayed on the operator panel indicating Power Save Mode. Consumption of power during Power Save mode is 10 Watts or less, and the time required to exit from Power Save mode to a print-ready status is about 10 seconds. However, pages being printed at the moment will continue to be printed. B6250 PS
Cancelling B6250 PS Jobs at the Computer Double-click the printer icon. When using this printer as a network printer and with SNMP protocol enabled, you can display on the printer driver, the optional accessory configuration and settings configured at the control panel such as paper type or size.
Toner, Ink Cartridges & Accessories for Printers OKI B6250
These settings are displayed on the [Options] tab. This section explains the procedure using Windows XP as an example.
You have to manually set the items on the printer driver. You have to manually set the item. Even if you change the settings here, B6250 PS will not be reflected on the printer itself. Users without administrators rights can only check the contents. From the [Start] menu, click [Printers and Faxes] and then display the properties of the printer to be used. Click [Get Information from Printer]. NOTE The properties of the printer can be displayed on the printer driver. PS Printer Driver. Version: Size: MB. Operating System: Windows 7 (32bit); Windows Vista (32bit); Windows Server (32bit). Download Here. File Size, 2, Byte. File Name, OkiBPSx64GB_exe. Category, Printing Driver. Program Version, Products, B Operating System.